With the accent on export drive, a humble entry was made into the international market with drives & other electrical & engineering tailor - made equipment’s & machines to ASEAN countries; thus contributing in a small way to the inflow of valuable exchange. Few of the products exported are as follows.

Copper segments are held in position by steel parts, either shell cap & nut or two caps & bolts, which are electrically insulated by molding mica from, copper segments. All components are designed keeping in view the final dimensions required by the copper or silver bearing as required. Class 'F' insulation can be provided.

Molded Core Commutators

Copper segments are held in position by molding compounds. The construction of this commutator can be with or without steel inserts. Copper segments are manufactured from Electrolytic Copper or Silver Bearing as required. Class 'B' insulation can be provided.

Autotransformers in Single & Three Phase Versions, Air or Oil Cooled up to 600 Amps are regularly exported.

"Steady Volt" Servo - Controlled voltage stabilizers are available in the following ranges: Single Phase Units Input : 180 - 250V or 160 - 260V Single Phase 50HZ Output : 230 or 240V - Single Phase 50HZ.

Three Phase Units

Regulation against Load Variation from No-Load To Full-Load ± 1%.
Regulation against Input Voltage from No-Load To Full-Load ± 1%.

Variable tubular slide rheostats with ceramic tube wound with NI CU (Euraka) Oxide wire with three 4 mm terminals (binding posts) robust metal frame & rubber feet, insulated slide holder are available in different ohmic values & power rating. Toroidal type rheostats in open & enclosed version are also available in different ohmic values & power rating.